COBRA Truck Bedliner 600ml.

COBRA Truck Bedliner (0.600 L Kit + 0.200 L Hardener) is a heavy-duty 2-component (2K) polyurethane-based textured protective coating engineered for surfaces requiring maximum mechanical strength and extreme durability. It provides an unbeatable protective barrier against scratches, impact, gasoline, oil, salt water, and harsh weather conditions while delivering excellent soundproofing and anti-slip properties. Available as a standard **Black version** or a **Tintable version** (mixable with 10–15% acrylic topcoat or basecoat to achieve any custom color).

Key Features & Benefits:

• Superior Protection: Highly durable, stain- and scratch-resistant finish built for extreme temperatures, UV rays, and marine environment exposure.
• Sound Dampening: Reduces sound and vibration levels for enhanced driving comfort inside the vehicle.
• Adjustable Texture: Achieve coarse, medium, or fine OEM plastic-like finishes depending on equipment and thinning.
• Multi-Substrate Versatility: Strong adhesion across properly prepared metal, plastic, and painted surfaces.

Texture Options & Application Methods:

• Coarse Texture: Applied using a standard Schutz / UBS gun; structure is adjusted by air pressure and spray distance.
• Medium Texture: Add 0–5% thinner and spray with a gravity spray gun featuring a Ø 2.5 mm nozzle.
• Fine Texture (Simulating OEM Plastic): Add 25–30% thinner and spray with a gravity spray gun featuring a Ø 1.4 – 1.8 mm nozzle.
• Manual Application: Can also be applied using paint rollers or brushes.

Substrate Preparation Guidelines:

1. Remove all trim parts and components not intended for coating.
2. Thoroughly clean and degrease the area with a dedicated silicone remover.
3. Sand the surface using P120 to P180 grit abrasives and blow off all dust.
4. Mask off surrounding areas and bolt holes using high-grade masking tape.
5. IMPORTANT: Do not apply directly onto bare metal! Pre-treat bare steel with a 2K Epoxy or 2K Wash Primer (sanded with P240–P320). Use plastic adhesion promoters for raw plastics.

Technical Specifications:

• Manufacturer: COBRA
• Product Type: 2K Polyurethane Textured Protective Coating
• Kit Volume: 0.600 L Bedliner + 0.200 L Hardener (Total 0.800 L)
• Options: Black / Tintable
• Key Properties: UV proof, waterproof, chemical resistant, scratch-resistant, anti-slip