Mipa P 60 S polyester spray filler

Mipa P 60 S (950 ml + 50 ml Hardener) is a high-build 2-component (2K) sprayable polyester body filler (liquid putty) engineered for spray gun application in professional automotive refinishing. Featuring an exceptional filling capacity, it levels surface irregularities and produces an ultra-smooth finish across small panels as well as very large surface areas. The filler cures rapidly and is ready for sanding in approximately 2 hours at 20°C (cure times can be further accelerated with forced drying up to a maximum of 60°C). If viscosity reduction is required, it can be thinned using a dedicated polyester thinner.

Key Features & Benefits:

• High-Build Filling Power: Swiftly fills pinholes, coarse sanding marks, and shallow dents over broad areas.
• Spray Gun Application: Achieves uniform material distribution without trowel marks or ridges.
• Rapid Cure Time: Ready for sanding within 2 hours at 20°C (heat-curable up to 60°C).
• Superior Sandability: Cures to an easy-sanding film for both machine DA sanding and fine hand sanding.
• Ultra-Smooth Surface: Creates a perfectly flat, stable foundation for subsequent primers and topcoats.

Applications:

• Fine leveling and surface refinement of car bodies, hoods, roofs, and large fleet vehicles.
• Final prep layer over conventional polyester body fillers before priming.

Technical Specifications:

• Brand: Mipa
• Model: P 60 S
• Product Type: 2K Sprayable Polyester Body Filler / Liquid Putty
• Packaging: 950 ml Filler + 50 ml Hardener (1L Set)
• Color: Grey
• Dry Time to Sand: ~2 hours at 20°C (Max bake temp: 60°C)
• Thinning: Polyester Thinner (if required)
• Sanding Method: Suitable for machine and manual sanding