2K 2in1 Headlight Clear

SprayMax 2K Headlight 2in1 Clearcoat is an innovative two-component (2K) protective clear lacquer featuring an integrated primer specifically designed for polycarbonate headlight lenses. It provides professional restoration for yellowed, cloudy, scratched, or weathered headlight covers.

Utilising SprayMax’s patented 2K aerosol technology (with hardener chamber at the base), this spray produces a glass-clear, ultra-hard finish that locks out environmental damage and prevents future deterioration.

Key Features & Benefits:

• 2in1 System: Combines a specialized polycarbonate adhesion promoter and 2K protective topcoat in one aerosol.
• Crystal Clear Clarity: Restores maximum light output, clarity, and gloss to hazy plastic lenses.
• Extreme Weather Resistance: Maximum defense against UV radiation, yellowing, road salt, car washes, and harsh chemicals.
• Fast Drying: Rapid curing time for quick turnarounds in bodyshops and DIY restoration.
• Long-Term Protection: Shields headlights from scratch marks, stone chips, and environmental pollutants.

Application Instructions:

• Sand the headlight lens thoroughly using wet sandpaper (e.g., P800 -> P1200 -> P2000 -> P3000) to strip off the degraded OEM coating and oxidation.
• Clean and degrease the surface completely.
• Activate the 2K Can: Take the red push button from the top cap, place it on the pin at the bottom of the aerosol can, and press firmly until it clicks to release the hardener.
• Shake the can vigorously for 2 minutes after activation.
• Apply 1–2 coats from a distance of 15–20 cm, allowing a short flash-off time between passes.

Technical Specifications:

• Manufacturer: SprayMax (Kwasny - Germany)
• Product Type: 2K Polycarbonate Headlight Clearcoat 2in1
• Volume: 250 ml aerosol
• Finish: High Gloss / Crystal Clear
• Durability: Highly UV-resistant, chemical & wash-proof